" "
We produce a variety of Cartridge filter housings with sanitary designs. This product is made for in-line inlet/outlet connections and can be used whenever base installation is not necessary. In a single housing body composed of Standard Schedule Pipes, it can accommodate up to 6 Nos. of cartridge elements. With flow rates of up to 24 M3/Hr and pollutants holding capacities, we offer premium goods. It is often employed in practically all types of process industries wherein fine filtration is necessary.
Features:
-Easy dismantle for cleaning and maintenance.
-Less pressure drop design because of considering of higher filtration area.
-Suitable for high temperature and pressure.
-High dirt holding capacity.
-Housings are made with Mirror, electro polishing to resist dirt and scale.
-One coat of epoxy paint applied on outside surface for CS / MS Constructed.
-Pressure gauge arrangement at top to monitor internal pressure of housing.
- Arrangement of difference pressure monitoring instruments.
Design Specification:
-Suitable up to 6 Nos of Cartridges filter element with suitable length of up to 40 inches in single cartridge filter housing.
-DOE (Double Open End) and SOE (Single Open End) Cartridge filter element can be assembled
-Flow rate up to 24 M³/Hr.
-End connection up to ½ inch NPS to 2 inches NPS in Pipe schedule
-DOE (Double Open End)
-Code 7 (226 O-ring) SOE (Single Open End
-Code 3(222 O-ring) SOE (Single Open End).
-Size of filter Cartridge 10 inches, 20 inches, 30 inches, 40 inches in Length.
-Diameter of filter cartridge 2 inches, 2.5 inches, 4 inches, 4.5 inches.
-Filtration rating from 1 to 100 Micron
-Filter Media- Polypropylene (PP)
-SS 304
-SS 304L
-SS 316
-SS 316L
-Duplex Steel (SS 2205)
-Carbon Steel (SA 516 Gr 70)
-Mild Steel (IS 2062)
-Neoprene
-Natural Rubber
-Silicon
-Buna-N
-PTFE
-EPDM
-CAF
-Spiral Wound Gasket
-ANSI B16.5 Flanged.
-BS-10, Table D, E, F Flanged.
-Butt-Welded Pipe schedule.
-Tri Clover Adaptor
-Threaded
-Socket-welded